2328 You are about to create a new installation diskette #1. Files from your current diskette will be copied to a temporary folder, then a new diskette will be created with new configuration information. You will need your current installation diskette #1 and a blank diskette. Enter the path for your current installation diskette #1.
2329 Please enter a formatted diskette into drive A: or select another path for the new installation diskette. A blank diskette should be used to save the configuration. This diskette can then be taken to other machines to replicate the configuration.\n
2355 Windows Driver: %1\nFile size: %2!d!.\nCreation date: %3
2356 System Summary:
2357 Windows version: %1 %2
2358 BIOS Name: %1
2359 BIOS Version: %1
2360 BIOS Date: %1
2361 Device Name: %1
2362 IRQ = %1!d!
2363 Installed Drivers:
2364 Problem:
2365 %s: %d
2366 Novell Client32 Version:
2455 Was enumerated by ROOT
2456 Has Register_Device_Driver
2457 Has Register_Enumerator
2458 Is currently configured
2459 Manually installed
2460 May need reenumeration
2461 Has received a config
2462 Enum generates hardware ID
2463 Lied about can reconfig once
2464 Not CM_Create_DevNode lately
2465 Need device installer
2466 Is filtered
2467 Has been moved
2468 Can be rebalanced
2469 Can be removed
2470 Has a private problem
2471 Multi function parent
2472 Multi function child
2473 Devnode is being removed
2474 Node Status:
2475 No configuration for this device
2476 Device loader failed
2477 Out of memory
2478 Registry value has different type
2479 Problem Lacked Arbitrator
2480 Conflict in boot configuration
2481 Filter failed
2482 Device Loader not found
2483 Invalid Data
2484 Failed Start
2485 Liar
2486 Configuration conflict
2487 Not Verified
2488 Need Restart
2489 Reenumeration
2490 Partial Logical Configuration
2491 Unknown Resource
2492 Reinstall
2493 Unable to access the registry
2494 Failure using the VxD loader
2495 Will be removed
2496 Device is disabled
2497 Device loader is not ready
2498 Specified device does not exist
2499 Moved
2500 Too early
2501 No valid logical configuration
2502 Failed Install
2503 Hardware disabled
2504 Can't share IRQ
2505 PCI
2507 rundll32.exe url.dll,OpenURL %1
2508 Click Start to test your network connection.\nPlease make sure that the network cable is connected at both endpoints before starting this test.
2509 Please wait while the Network Connection Test completes.
2510 Frames Sent = %1!d!, Frames Received = %2!d!.
2511 Error: No Link. Please make sure cable is connected.
2512 Double Click to Run 3Com NIC Doctor
2513 A:\
2514 Select the folder where you want to install
2515 %1!d!
2516 Frames Sent=%1!d!, Received=%2!d!, Link Speed=%3!d!.
2517 Config Manager\Enum\%1!X!
2518 Problem Report
2519 60
2520 Frames Sent=%1!d!, Received=%2!d!, Link Speed=%3!d!Gbps.
2521 Frames Sent=%1!d!, Received=%2!d!, Link Speed=%3!d!Mbps.
2522 Frames Sent=%1!d!, Received=%2!d!, Link Speed=%3!d!Kbps.
2523 A remote system capable of waking up this computer has been found. If you proceed with the second part of this test, your computer will be shut down! It will wake up again after %1 seconds. Are you sure you want to do this?
2524 A power management event has occurred, and, your system resources have been reassigned. Your diagnostic application must exit now.
2525 %H:%M:%S
2526 2.
2527 A network driver has been loaded or unloaded. This program will now rebuild it's lists.
2528 Please contact your system vendor for technical support.
2530 URL=HTTP://WWW.SYSTEMVENDOR.COM
61440 Open
61441 Save As
61442 All Files (*.*)
61443 Untitled
61446 an unnamed file
61457 &Hide
61472 No error message is available.
61473 An unsupported operation was attempted.
61474 A required resource was unavailable.
61475 Out of memory.
61476 An unknown error has occurred.
61696 Invalid filename.
61697 Failed to open document.
61698 Failed to save document.
61699 Save changes to %1?
61700 Failed to create empty document.
61701 The file is too large to open.
61702 Could not start print job.
61703 Failed to launch help.
61704 Internal application error.
61705 Command failed.
61706 Insufficient memory to perform operation.
61707 System registry entries have been removed and the INI file (if any) was deleted.
61708 Not all of the system registry entries (or INI file) were removed.
61709 This program requires the file %s, which was not found on this system.
61710 This program is linked to the missing export %s in the file %s. This machine may have an incompatible version of %s.
61712 Please enter an integer.
61713 Please enter a number.
61714 Please enter an integer between %1 and %2.
61715 Please enter a number between %1 and %2.
61716 Please enter no more than %1 characters.
61717 Please select a button.
61718 Please enter an integer between 0 and 255.
61719 Please enter a positive integer.
61720 Please enter a date and/or time.
61721 Please enter a currency.
61728 Unexpected file format.
61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730 Destination disk drive is full.
61731 Unable to read from %1, it is opened by someone else.
61732 Unable to write to %1, it is read-only or opened by someone else.
61733 An unexpected error occurred while reading %1.
61734 An unexpected error occurred while writing %1.
61836 Unable to read write-only property.
61837 Unable to write read-only property.
61840 Unable to load mail system support.
61841 Mail system DLL is invalid.
61842 Send Mail failed to send message.
61856 No error occurred.
61857 An unknown error occurred while accessing %1.
61858 %1 was not found.
61859 %1 contains an invalid path.
61860 %1 could not be opened because there are too many open files.
61861 Access to %1 was denied.
61862 An invalid file handle was associated with %1.
61863 %1 could not be removed because it is the current directory.
61864 %1 could not be created because the directory is full.
61865 Seek failed on %1
61866 A hardware I/O error was reported while accessing %1.
61867 A sharing violation occurred while accessing %1.
61868 A locking violation occurred while accessing %1.
61869 Disk full while accessing %1.
61870 An attempt was made to access %1 past its end.
61872 No error occurred.
61873 An unknown error occurred while accessing %1.
61874 An attempt was made to write to the reading %1.
61875 An attempt was made to access %1 past its end.
61876 An attempt was made to read from the writing %1.
